Halayen fasaha na autoclave na gilashin Laminated da kuma matakan kariya da ake amfani da su

Gilashin gilashin da aka yi wa laminated autoclave forced convection autoclave yana ɗaukar wani bututun matsi da aka dumama ta hanyar dumama convection sau biyu a cikin zagayawar sama da ƙasa da zagayawar gaba da baya, kuma yana ɗaukar ikon sarrafa PID, wanda zai iya tabbatar da daidaiton sarrafa zafin jiki da matsin lamba, don haka zafin jiki da matsin lamba za a iya canza su gaba ɗaya bisa ga lanƙwasa ƙira. Ya dace da haɗa gilashin da aka yi wa laminated don buƙatun tsari daban-daban. Musamman ma, fim ɗin da ke tsakanin layukan shine samfuran PVB ko SGP, kuma yana iya tabbatar da cikakken ingancin samfura da yawan amfanin ƙasa.

Siffofin fasaha:

Masu kera gilashin autoclave masu zuwa sun taƙaita waɗannan matakan kariya don amfani da kamfanoni don amfani da su:

1. Karanta littafin a hankali kafin amfani, sannan ka duba kayan aikin: duba ko akwai alamun lalacewar da aka samu a cikin tukunyar gilashin da kuma ko haɗin yana da daidaito. Bai kamata a matse haɗin sosai ba, kuma ya kamata a riƙa duba haɗin da ke aiki akai-akai don guje wa kullewa na dogon lokaci da kuma haifar da cizon mahaɗin har ya mutu.

2. A goge kowace madauri da kyalle mai laushi, a shafa ɗan man feshi a madauri (dole ne a rufe man feshi bayan an yi amfani da shi don hana ƙura shiga), sannan a juya madauri don ya daidaita madauri a madauri.

3. Kunna makullin wutar lantarki don barin injin ya yi aiki daga jinkiri zuwa sauri, sannan a sa injin ya tsaya lokacin da ya tsaya, sannan a kashe makullin. Lokacin yin wani gyara ko dubawa, injin dole ne ya fara yanke wutar lantarki da tushen ruwa.

4. Bai kamata a matse maɓallin PTFE a wurare daban-daban da ƙarfi sosai don guje wa lalata gilashin ba. Bayan rufewa, a sassauta maɓallin PTFE, kuma piston ɗin PTFE zai lalace idan ya daɗe a tsaye.

5. Cire zoben rufewa, duba ko akwai datti a kan sandar, goge shi da kyalle mai laushi, sannan a shafa ɗan man tsotsa, sannan a sake sanya shi don ya sa sandar da zoben rufewa su yi santsi. A tsaftace hatimin akai-akai.

6. Lokacin maye gurbin sassa, dole ne a yi amfani da kayan haɗin asali da masana'antar asali ta samar, kuma amfani da wasu kayan haɗin kamar yadda aka ga dama zai haifar da mummunar illa ga na'urar.

7. Bayan amfani da gilashin autoclave, dole ne a yi amfani da kyalle mai laushi don goge tabon mai, tabo, da ragowar mai da suka rage a saman injin, sannan a tsaftace shi.

Baya ga amfani da autoclave na gilashi daidai, ya kamata mu kuma yi aikin gyara da ya dace, don hana tsatsa da nakasa, ban da aikin kariya na tsaro da ya dace, lokacin siyan kayan aiki, ya kamata mu kuma saya daga masana'antar matsi na yau da kullun, mu yi hattara da kayan aiki marasa inganci da haɗari ke haifarwa.